Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving King of Prussia, PA

Commercial Pressure Washing for Concrete in King of Prussia, PA

Pressure wash with a surface cleaner for concrete. Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours. Typical cost $400-$2,000.

Looking for commercial pressure washing for concrete in King of Prussia, PA? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. For concrete, that means pressure wash with a surface cleaner.

The right method for the job

Pressure wash with a surface cleanerCleaning method
Usually 2,500-3,500 PSI with a rotary surface cleaner for even resultsPressure

Cleaning solution: A degreaser for oil spots and a pre-treatment for organic growth; post-treatment slows regrowth.

Caring for concrete

Plain broom-finish concrete is the surface pressure washing is made for. A rotary surface cleaner gives an even finish without the stripes a wand leaves, and hot water helps with grease and oil.

Avoid: Holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete.

How often: Every year, or every 6 months in shaded, damp spots.

Is it time for commercial pressure washing for concrete?

  • Dirty entrances and walkways
  • Stained building walls and signs
  • Gum, grease and spills around doors
  • Customer or tenant complaints
  • Health or property manager inspections coming up

What causes the dirt and stains

  • Heavy foot traffic
  • Vehicle traffic and drips
  • Food and grease near restaurants
  • Pollution and weather

Easy upkeep between cleanings

  • Sweep entrances daily
  • Clean up spills right away
  • Keep dumpster areas closed and clean

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Wash water reaching storm drains, which can violate local stormwater rules
  • Slips and liability during business hours
  • Damaging signs, windows and finishes

Our process for commercial pressure washing for concrete

  1. Survey the property and plan around your hours
  2. Set up signs and control wash water
  3. Pre-treat stains, gum and grease
  4. Clean walls and flatwork with the right pressure
  5. Final walkthrough and maintenance schedule

How much does commercial pressure washing for concrete cost?

$400-$2,000Typical range for a typical small to mid-size commercial building
Half a day to several daysTypical time on site
Quarterly to yearly, depending on trafficRecommended frequency

What moves the price:

  • Area and number of buildings
  • Scheduling: early-morning, overnight or weekend work
  • Whether wash water has to be recovered under local stormwater rules
  • Frequency: recurring service is usually priced lower per visit

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for concrete

Serving King of Prussia, PA and nearby towns

Businesses in Pennsylvania typically schedule exterior cleaning in spring and fall, with entrances and high-traffic walkways cleaned more often.

Besides King of Prussia (ZIP code 19406), we handle commercial pressure washing for concrete in Bridgeport (2.9 mi), West Norriton (2.9 mi), Wayne (3.2 mi) and Audubon (3.3 mi). Call (555) 010-0000 for a free quote in King of Prussia.

Commercial Pressure Washing for Concrete: frequently asked questions

How much does commercial pressure washing for concrete cost in King of Prussia, PA?

Commercial Pressure Washing for Concrete typically costs $400-$2,000 for a typical small to mid-size commercial building, and usually takes Half a day to several days. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for commercial pressure washing for concrete?

For concrete: usually 2,500-3,500 PSI with a rotary surface cleaner for even results. What we avoid: holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete. We keep the pressure even and controlled, with the right tools for the surface.

Is commercial pressure washing for concrete safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule commercial pressure washing for concrete?

Every year, or every 6 months in shaded, damp spots. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in King of Prussia, PA

Paver Cleaning & Sealing for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $600-$1,800

Patio Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$400

Pre-Paint Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $250-$600

Pre-Paint Washing

Washing siding and trim before painting or staining so new paint bonds to a clean surface.

Typical $250-$600

Awning Cleaning

Cleaning fabric, vinyl and metal awnings on homes and storefronts to remove dirt, mildew and bird droppings.

Typical $150-$500

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Pre-Paint Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $250-$600

Sidewalk & Walkway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$250

Storefront Cleaning

Storefront and entrance cleaning: sidewalks, walls, signs and windows, usually before or after business hours.

Typical $150-$500

Pre-Paint Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$600

Rust Stain Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $150-$500

Gum Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$1,000

Ready for a cleaner home or business?

Get a free pressure washing quote in King of Prussia, PA. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote